Over Stabilization Of Above Ground Pools

Over Stabilization Of Above Ground Pools

What is over stabilization?
The build-up of Cyanuric acid in swimming pool water, which usually results from the extended use of stabilized sanitizers in conjunction with stabilized shock products.

Over stabilization will significantly decrease the effectiveness of chlorine in killing germs, bacteria and algae.  Small levels of Cyanuric acid do serve a purpose in protecting chlorine from sunlight degradation.  However, too much will negate any benefit and cause problems.  The recommended levels of Stabilizer (Cyanuric acid) are between 40 and 60 ppm.

POOLIFE® calcium hypochlorite sanitizers and shock products offer the complete solution to over stabilization.  Calcium hypochlorite based products (read the active ingredient on the label) are Cyanuric acid free and will not cause over stabilization.  Several state health departments have eliminated or banned the use of Cyanuric acid based product in public swimming pools.  Ensure you practice responsible pool care and have a reliable and balanced pool care program.
 

The use of stabilized sanitizer in conjunction with stabilized shock products can cause the formation
of algae when the cyanuric acid levels reach 70ppm.  This can occur within 6 – 7 weeks.

 

As cyanuric acid levels increase, the kill time on bacteria increases significantly.

 

Over Stabilization Of Above Ground Pools

 

Bookmark the permalink.

Comments are closed.