Laguna Above Ground Portable Pools

Tougher than their steel walled cousins, Portable pools can be set up in many ways, from the backyard vacation to the Chameleon looking like an in-ground pool. These are the most versatile pools available

Portable Pool Accessories  – Portable Pool Covers and Heaters – Portable Pool Liners – Pool Sweeps – Portable Pool Skimmers  – Comfy Pad  Ion Water Purifiers –Ladders and Steps – Pool Domes Portable Pool Deck Ideas  – Portable Pool Information – Portable Pool Installation –  Skimmer Installation – Equipment Installation

bar5

Laguna Portable Pools

legacypools33 equip

SizePrice 
16ft x 48in Round 2699.99Order This Pool
5ft x 10ft x 48in Rectangle2699.99 Order This Pool
6.5ft x 10ft x 48in Rectangle2799.99 Order This Pool
6.5ft x 13ft x 48in Rectangle2899.99 Order This Pool
9ft x 17ft x 48in Rectangle3499.99 Order This Pool
10ft x 18ft x 48in Rectangle3799.99 Order This Pool
13ft x 21ft x 48in Rectangle3999.99 Order This Pool
13ft x 25ft x 48in Rectangle4499.99 Order This Pool
14ft x 22ft x 48in Rectangle4299.99 Order This Pool
17ft x 25ft x 48in Rectangle4999.99 Order This Pool
17ft x 29ft x 48in Rectangle5499.99 Order This Pool
18ft x 30ft x 48in Rectangle5699.99 Order This Pool
21ft x 41ft x 48in Rectangle7699.99 Order This Pool
21ft x 48ft x 52in Rectangle9699.99 Order This Pool

 

Portable Pool Comparison Chart

New Deck Ideas For Laguna Pools.  Click to enlarge the pictures

Laguna Above Ground Pool Features The Laguna Pool By Portable Pools Incorporated, (Makers of the Wonderful Legacy Pool). This Beautiful pool comes in Cloud White and Blue (sold out) and Desert Sand and Blue. Quality of construction and ease of assembly is the hallmark of this wonderful pool. We ordered MANY of these pools this ear at a VERY special price, act now why these prices stay this low. Add fun to your everyday routine with an Laguna pool and watch your yard become an outdoor entertainment center for family and friends to enjoy. These Pools are great for families with kids and dogs as they can withstand almost anything you can throw at them. You will not be disappointed with this Pool

Features

  • 48″ depth

  • 20×20 Scrim @ Denier

  • 410 lbs. PSI Puncture Resistance

  • 3mil Kevlar Technology Liner

  • 450 PSI Tear Strength

  • Rectangles: Powder Coated Galvanized Steel Frame

  • Appealing Neutral color with deep blue trim

  • Rounds: Anodized Aluminum

  • 30 Year Prorated Warranty

Legacy Badge

 

Above Ground Pools Information 5

2018-03-24 16:33:37helpagpools-net

 

bar5

An Excerpt from Our Above Ground Pool Encyclopedia – Click Here to See More

 

Basic Above Ground Swimming Pool Maintenance

To make sure your  pool water is clean and clear we focus our topic in two main areas.  The maintenance or restoring of your Chemistry Balance of your swimming pool water and the cleaning of dirt and particulate matter from your pool.

The balance of water chemistry in an above ground pool is attained by testing. The adding of chemicals alone will not keep your pool water balanced, you must test the pool and see which levels have to be adjusted and adding chemicals only as proscribed by the tests. For your pool to function at it’s best, this balance must be maintained.

Secondly to insure good pool water maintenance we must remove particulate matter and dirt.  This is achieved by water circulation of the pool through a filtering system. Also brushing and vacuuming of the pool’s walls and sides will keep the pool from “growing” dirt or algae. With use of an automatic pool cleaner, this can be done at the same time as filtration. Cleaning the filter when needed will optimize this process.

An ounce of prevention is worth a pound of cure and if you keep up  with maintenance it will prevent the  dreaded pool water problems that can occur when things get out of hand.’

 

Everything You need to know about above ground swimming pool water care and maintenance can be found right here.  Consider this your owner’s manual for your above ground pool. Answers to almost every question regarding the upkeep of your pool is given below. If you can’t find the answer you are looking for, please

3 Steps to Successful Pool Care

3 Steps to Successful Pool Care

Successful pool chemistry is like a dance, once you find the rhythm you can do the above ground pool Bosa Nova.   Just visit the three links below to get more information

 

  1. Balancing Your Pool’s Chemistry

  2. Sanitizing your Pool Water

  3. Shocking Your Pool

Like all pool care the old adage : A ounce of prevention is worth a pound of cure.

 

Question From the Ask Bob Blog

T.Gurley Asked Bob:  Why do I always have chlorine in my pool, two days ago I fully treated the pool and today my test kit says I need alot more?

The sun stole your chlorine.  Back when I was a kid, I would occasionally buy goldfish. When ever I set up a new bowl, or cleaned the old bowl I would have to let the water sit for a day so the chlorine could escape from the water.

Chlorine is happiest in normal temperatures as a gas. To keep it in a liquid state we have to do funny things to it.  If you simply put chlorine in a pool full of un-stabilized water it will happily find ways to escape into the atmosphere.

 

Balancing The Water Of Your Above Ground Pool

 

Keeping your pool water in balance is a key step in quality pool care. When your pool water is balanced then pool care is easy. but when it becomes unbalanced, problems can and will arise.  Pool Water Balance takes into account pH, Calcium and TA or Total Alkalinity

The table below applies to all pools.

Balancing Your Pool Water

Correct  Levels Ensure:

Bacteria fighting power of chemicals will be at their peak

You will not see a corrosive build up on pools or parts

Minimal Pool and Eye Irritations

To keep your pool balanced, test it and then add what is nessecary.

 

For pH

If pH is low add a pH Plus Product  Like Pool Life Plus

If pH is High add a pH Minus Product Like Pool Life Minus

For Calcium Hardness

If Calcium is low add a water hardener agent

if Calcium is High add a sequestering agent

For Total Alkalinity

If Alkalinity is Too high, add an Alkalinity Decreaser

If Alkalinity is Too low, add an Alkalinity Increaser

Posted in: Above Ground Pools Info 5Read more...0 comments

Above Ground Pools Information 7

2018-03-24 16:26:31helpagpools-net

 

Assembling A New Technology Above Ground Pool Is Easy!

Portable Pool Installation

One Customer’s Review Of His Legacy Pools

And Legacy Pools Are TOUGH!

We make the the pools, any way you want it!

 Our Pool With US Swimming And The Today Show

 Our Pools Are LION Tested!

What Happens When I Buy An Above Ground Pool?

 

Posted in: Above Ground Pools Info 7Read more...0 comments

Above Ground Pools Information 9

2018-03-23 23:26:25helpagpools-net

bar5

An Excerpt from Our Above Ground Pool Encyclopedia – Click Here to See More

 

Sanitizing Your Above Ground Pool Water

Sanitization comes from adding chemicals to your water that are antibacterial in nature. Whether achieved by Chlorine, Baquacil or other methods, (such as salt water generators) levels must be maintained to ensure healthy water levels

The most commonly used method of sanitizing pools is application of a chlorinating product. The continuous chlorine level should be kept between 1.0 – 3.0 ppm (parts per million) for proper sanitation. Stabilized chlorinating products come in several forms including 1″ and 3″ tablets, sticks, granules and floaters. Brominating products are also effective sanitizers and offer low-odor sanitation at higher temperatures, and are ideal for spa and hot tub applications.

These products can be applied to pool water in many ways, in liquid, tablet, or granules.  In floats, through the filtering system or by adding directly. The important thing is to keep the proper levels at all times

 

Shocking Your Above Ground Pools

The final step in the process is to shock the pool. The addition of shock products breaks down the chloramines and destroys them. These chloramines are created when nitrogen containing organic compounds, such as suntan oils, cosmetics, perspiration, etc., combine with the chlorine residual in your pool water. The resulting chloramines provide no sanitizing function and actually cause strong chlorine odor, cloudy water, eye irritation, and become food for bacteria and algae.  Weekly applications of Shock will reduce the chloramines (and the chlorine smell)  and keep your pool chemicals functioning at top levels.

 

As with all chemicals use with care and spread around the pool.  Do not dump it all in one place. It is also not recommended to pre-dissolve the shock in a bucket of water, as you will have in your hands a HIGHLY caustic substance

 

 Algae In Above Ground Pools

(It’s Not Easy Being Green)

Algae are tiny plants that live in water and can bloom in a short time as their environment allows. Above Ground Pools are no strangers to  algae , which can form when there is plentiful sunshine, and food. The trick to controlling algae is to control it’s environment.

There are 3 main types of algae that are usually found in pool and spa water:
1. GREEN ALGAE – This type of algae floats in the water or forms on the sides of the pool or spa and appears dusty green.  If it goes to far it may completely obscure the water.
2. YELLOW ALGAE – Also called “Mustard Algae” because of the mustard color, appears as yellow powder deposits usually on the shady sides of the walls.
3. BLACK ALGAE – This type of algae also appears as a Blue-Green color and forms very adhesive inch or so size  spots on pool  surfaces.

When proper chlorination levels are maintained in your pool algae cannot form, Once algae does appear though normal levels of chlorine may not control it. Once algae is established you must treat the water with 30 PPM of Free Chlorine. This kills the algae and destroys the organic waste left behind.
Make sure the pump, filter and Chlorinator are working properly. Run pump continuously for 24 hours and then sweep thoroughly. Do not use the Pool or Spa until all chemical levels are back to normal and the water is crystal clear.

once Algae has a foothold in your pool you must get aggressive with it to defeat it.

 

Cleaning Your Above Ground Pool Water

 

Pollution in pool water comes either from the environment or is carried into the water by the swimmers. Environmental pollution includes dust, leaves, chemical wastes, pollen, spores, bacteria and so on, that are blown into the water by the wind. Swimmers carry other pollutants into the water: sweat, suntan oils, urine, bacteria, viruses, etc.

Every swimming pool has a circulation pump and filter. The filters most common these days are sand filters, and are much easier to maintain than the earlier diatomaceous filters of a few years back. The pool pump ensures that the swimming pool water moves through the filter every day, thus removing unwanted pollutants and disinfected organic materials as quickly as possible.

Other common pool filters include DE (diatomaceous earth) filters, which are able to filter out finer particles of dirt, though they require more maintenance. Cartridge filters are also quite widespread and are quite simple to maintain. Nowadays a filter sand substitute containing zeolite is gaining in popularity. The zeolite (specifically the clinoptilolite mineral) is able to filter particles as finely as DE filters in addition to having a capacity to absorb ammonia and its complexes (reducing combined chlorine and offensive chlorine odours), while not requiring any extra maintenance.

Generally, the swimming pool pump should run for at least 6 – 8 hours each day. There is usually a timer which cycles the pool pump on and off to ensure this constant filtration. The circulation of pool water will remove floating or suspended particles of dirt from the water, but has no effect on the substances which have settled to the bottom of the swimming pool or “stuck” to the walls.

Depending on the environmental conditions and swimmer load, the swimming pool needs regular brushing and vacuuming, generally about once a week in the swimming season for home pools. With the circulation pump turned off, the walls and floor of the pool are swept with a stiff brush. When the “dust” from the brushing settles, it is vacuumed off the floor of the swimming pool. The pool must also be vacuumed after treating with a flocculant. Nowadays, there is a variety of automatic swimming pool cleaners, which suck the dirt off the walls and floor of the swimming pool whenever the pool pump is running. These are really great for pool owners who never seem to have the time for swimming pool chores.

Now that the vacuuming is done, it is time to backwash the filter. Sand filters trap dust and dirt, as the name implies, in a bed of sand. When the filter has accumulated a large amount of dirt, the water cannot pass freely through the sand and the filter loses efficiency as the pressure increases. Backwashing sends water backwards through the filter and flushes the trapped dirt out. After backwashing, you will notice an increase in return pressure to the pool, and if you have a pressure guage, you should notice an increase of at least 0,5 bar.

With the pool pump off, turn the filter setting to “backwash”. Remove the leaf basket from the weir, clean and replace it. Turn on the pump and let it run until the water coming out of the waste pipe is clear. This generally needs a few minutes. Turn off the pump and set the filter to rinse; this cleans out the pipes and prevents any dirt from returning to the pool. It also settles the sand in the filter which has been stirred up by the backwashing. Run the pump for about a minute and then turn it off. Set the filter to “closed”. Open the leaf trap near the pump, remove the basket and clean out all the leaves, twigs and rubbish it may have collected. Replace the basket, set the filter to “filter” and turn your pump back to its automatic (timer) operating position.

Great! The swimming pool looks clean and the filter has been rejuvenated. Now it’s time to test the pool water and adjust the pH and chlorine levels.

If your swimming pool needs topping up, now is the ideal time to put the hose in the pool. It is very healthy for the swimming pool water to be replaced bit by bit, to prevent it becoming stale and creating chemical problems or pool water problems. A routine of 5-minute backwashing followed by a 1-minute rinse every week will ensure that you replace about 5% of the swimming pool water each month. This means a complete changeover of swimming pool water approximately every 2 years.

REMEMBER too, that the useful lifespan of the sand in your filter is 3-5 years. If you neglect to change the sand, your filter will not be able to remove the finer particles of dirt and your swimming pool can never be completely clean. Have the pool filter opened for inspection at least every 2 years to avoid filtration problems.

 

Adding Chlorine To Your Pool

Assuming that the total alkalinity is at the right level and the pH is correct, chlorine can be added. The amount of chlorine to add depends on the present chlorine level and the type of chlorine used. Refer to the manufacturers instructions for quantity. 

As discussed previously, chlorine degrades rapidly under the influence of UV light. For this reason chlorine should be added only in the late afternoon or early evening, when it can dissolve and mix thoroughly before the damaging sun’s rays can affect it.

The chlorine should be evenly scattered/ poured around the pool or poured slowly in front of the return flow jets to ensure rapid and even distribution.

Chlorine should be kept at a level of 1.0-3.0 ppm to ensure sufficient sanitation. If you are using a Pool Wizard, a level of 0.5 ppm is required. This combination will provide a far superior sanitation to chlorine alone.

If the pool has very high levels of contamination or there is a strong smell of chlorine around the pool, you may need to shock treat the water. This involves adding large quantities of non-stabilized chlorine (or non-chlorine oxidizers) to the pool, which rapidly destroys the offending matter.

 

Posted in: Above ground Pools Info 9Read more...0 comments

Above Ground Pools Information 2

2018-03-23 23:20:46helpagpools-net

And Excerpt from Our Above Ground Pool Encyclopedia – Click Here to See More

 

Basic Above Ground Swimming Pool Maintenance

To make sure your  pool water is clean and clear we focus our topic in two main areas.  The maintenance or restoring of your Chemistry Balance of your swimming pool water and the cleaning of dirt and particulate matter from your pool.

The balance of water chemistry in an above ground pool is attained by testing. The adding of chemicals alone will not keep your pool water balanced, you must test the pool and see which levels have to be adjusted and adding chemicals only as proscribed by the tests. For your pool to function at it’s best, this balance must be maintained.

Secondly to insure good pool water maintenance we must remove particulate matter and dirt.  This is achieved by water circulation of the pool through a filtering system. Also brushing and vacuuming of the pool’s walls and sides will keep the pool from “growing” dirt or algae. With use of an automatic pool cleaner, this can be done at the same time as filtration. Cleaning the filter when needed will optimize this process.

An ounce of prevention is worth a pound of cure and if you keep up  with maintenance it will prevent the  dreaded pool water problems that can occur when things get out of hand.’

 

Everything You need to know about above ground swimming pool water care and maintenance can be found right here.  Consider this your owner’s manual for your above ground pool. Answers to almost every question regarding the upkeep of your pool is given below. If you can’t find the answer you are looking for, please E-Mail Us

Download The Complete Poolife Pool Care and Chemistry Guide

Basic Pool Care

question
Posted in: Above Ground Pool Info 3Read more...0 comments

What You Can Expect When You Order A Pool

2016-03-26 21:22:10helpagpools-net
  1. All standard (non custom made) pools have shipping included in the pricing, and only residents of California are required to pay sales tax. So the price you see is the price you pay. Nothing Extra.
  2. All pools come with matched filtering system of your choice (Cartridge or Sand) that are sufficient from the size of the pool. Upgrades are only required if the pump is going to be at a distance from the pool or at a different elevation
  3. The rest of the equipment , Ladder, skimmer, plumbing connections are all included
  4. For items in stock (non custom) shipping takes about a week to tend days and the pool arrives on your curbside loaded on a pallet, wrapped and strapped. A lift gate will bring it down to the ground where you can roll it into your backyard one piece at a time
  5. We recommend that you always self install your pools, as no one has a better interest in getting it right, and we will be here to walk you through every step of the process.  A process that is so much easier with the newer technology Legacy Pools 
Posted in: add1Read more...0 comments

Compare This Pool With Our Other Models

2016-03-17 18:53:16helpagpools-net
Posted in: agpcompareRead more...0 comments

Portable Pool Information and Deck Ideas

2016-02-24 18:39:58helpagpools-net

How A Portable Pool Fits Into A Deck

pyramidcutaway2

 

The pictures below are all custom made decks. They are offered here to give you an idea of what you can do with your pool.

 

deck1deck2

 

Click to Enlarge Any Picture

Legacy DeckPortable Pool decksPortable Pool Decks
Portable Pool DecksLegacy DeckHotel View
BeautyLegacy Deck
Underviewlong view
AhhhPortableBackyard paradise

 

 

 

Step By Step Deck Building Made Easy.


This process is the same for Portable Pools Or Above Ground Pools

  
The floor framing around the pool consists of 18 trapezoidal floor-joist frames–4-sided frames with two parallel sides and two sides that angle toward each other. The dimensions for building the frames are contained in the plans. Begin by using 2 x 6s to build 17 identical frames. The 18th frame will be built to fit after the other frames are assembled around the pool. To speed up the job of building the individual frames, use galvanized-metal corner brackets to attach the four perimeter boards. Then, use joist hangers to install the center support joist.The floor-joist frames are supported by a series of 4 x 4 posts set in the concrete pier blocks. Begin by setting the first pair of blocks directly onto the ground beside the pool. You don’t have to remove the grass, but if the ground is uneven, use a shovel to level it out. Position the first pier block so its center is 12 in. from the pool wall. Place the second pier farther away from the pool, with its center 18 in. from the center of the first.
  
  
Next, stand two 4 x 4 posts in the square sockets molded into the piers. Lay a 4-ft. level across the top cap of the pool–the coping–and mark a level line across the 4 x 4s. Next, remove the posts and measure down from each line a distance equal to the thickness of the pool coping, plus 1-1/2 in. for the 2 x 6 decking, 5-1/2 in. for the 2 x 6 floor frame and 1/2 in. for expansion. Make a mark at this position on each post, and cut them to length. Now you can put the posts back onto the piers, but make sure they’re in their original positions.Repeat this procedure for the next pair of piers and posts. Refer to the plan or use one of the assembled floor-joist frames to position the pier blocks. Once the second pair of posts is cut to size, set them into the piers and place a floor-joist frame on top. Drive 2-1/2-in. deck screws down at an angle through the frame and into the tops of the posts. Continue to work your way around the pool, setting pier blocks, posts and frames. After installing the 17 assembled frames, measure and cut the last one to fit the remaining space.
  
Complete the pool-deck frame by screwing 2 x 4 diagonal braces to the 4 x 4 posts. The bracing isn’t required if the deck is less than 30 in. high.

Now set the pier blocks and posts for the 10 x 18-ft. sun deck. Again, refer to the plans for the exact positioning. The 42 piers are arranged in 11 rows spaced 24 in. on center. Once the posts are cut to size and set in the piers, install the 2 x 6 floor joists. Fasten the joists by screwing down at an angle into the tops of the posts with 2-1/2-in. deck screws.

One common technique used for decking around a circular pool requires each board to be tapered so they all radiate from the center of the pool. The method we used is a lot easier. Cut several 2 x 6s into 4-ft. lengths with one end of each cut at 80° instead of square. Slip the angled end of the first decking board under the pool’s coping, keeping it at least 1/2 in. away from the pool wall. Set the long edge of the deck board directly on the joint running between two adjoining floor-joist frames. Fasten the board to the joists with 2-1/2-in. deck screws. Lay the next board tight against the first one and screw it in place. (When the boards shrink, a 1/4-in. gap will appear between them.) Continue installing deck boards in this manner, with the angled end slipped under the coping, until you come to the next floor-joist frame. Lay a deck board in place and mark where it overlaps the joint between the two frames. Cut the board along the line and screw it in place. Trim the next two boards in the same manner, then go back to installing full-length boards again. Once all the deck boards are fastened down, use a circular saw to trim off their overhanging ends so they’re flush with the perimeter joists.
  
  
Now move over to the sun deck and start fastening down the 2 x 6 deck boards. Again, butt the boards tightly together and let them run long. Then, snap a chalkline and trim the boards flush with the joistsNext, enclose the open space under the railing with 2 x 2 precut balusters (75 cents each)–these have one end beveled to 45°. Hold each baluster perfectly plumb, then screw it to the 2 x 6 railing and to the floor joist. Set the balusters 4 in. on center, with the beveled ends facing down
  
 
  
The final construction step is to build the stairs that lead from the sun deck down to the ground. To simplify this chore, we used five precut stair stringers ($7 each). Set the bottom ends of the stringers on concrete patio blocks. This will prevent them from sinking into the dirt and wicking up moisture. Screw the upper ends of the stringers to the floor joist. Create the stair treads by screwing 2 x 12s to the stringers. 

Portable Pools Information

Helpful Links:

A Customers Take On the Pool

Laguna Portable Pools

Put Any Pool In the Ground

Everything to know about Installing a Portable Pool
  

Click Click Installation

Its Just that Simple!

Portable Pool Installation Slide Show

Complete From Beginning to End


From the best of the best Legacy  Pool to the inexpensive Family Fun Pool we have what you are looking for, whether it is something to last a life time, or just  a summer or two they are all right here. We also have the lowest prices on the internet. Our Premium Quality Portable Pools are the strongest pools available! Good for families with kids, dogs and even lions! These Pools are Tested and Approved By Olla Click Here to See More

In backyards all across America, the summer landscape is once again blooming with above-ground swimming pools. According to the National Spa and Pool Institute, there are about 3.5 million of these opaline oases scattered from coast to coast, and 190,000 new ones are sold annually.

It’s easy to see why above-ground pools are so popular: They’re affordable, quick and easy to install and require minimal maintenance. However, to get the most enjoyment out of your above-ground pool you need a wood deck that surrounds it. Not only will you never again have to climb a pool ladder, but a deck will also create a fun-in-the-sun gathering place for family and friends. It gives you a place to swim, sunbathe, dine at poolside or just visit.

The trouble is that most pool decks are too difficult or complicated for the weekend carpenter to build. Plus, there are very few attractive pool-deck plans available, and most of those require you to dig and pour dozens of concrete footings.

Fortunately, we discovered a better, simpler approach for building a handsome pool deck. Ours, shown here, may look complicated, but we employed a few timesaving techniques that greatly simplified the construction process and, in turn, dramatically reduced the amount of work required to complete this project. And best of all, we didn’t have to dig a single hole.

Deck Design
Our deck is built around a 21-ft.-dia. pool. It’s constructed entirely of pressure-treated lumber and features a 360° wraparound pool deck that’s connected to a spacious 10 x 18-ft. sun deck. The 3-1/2-ft.-wide circular pool deck provides easy access to the water, while the sun deck is large enough to accommodate a table and chairs and a few chaise lounges.

As mentioned earlier, we employed a timesaving deck-building method that didn’t require us to dig postholes or pour concrete footings. It’s called a floating-foundation system. The entire deck is supported by concrete pier blocks that simply sit on the ground.

Floating foundations are generally allowed by building codes nationwide, including regions that experience frost heave. However, codes do differ from town to town, so be sure to check with your local building department before starting construction on your pool deck.

For this project, we used  precast piers ($5 each), which measure 8 in. high x 11 in. square and weigh about 45 pounds. Molded into the top of each are 1-1/2-in.-wide slots and a 3-1/2-in.-square recessed socket. The slots accept 2 x joists, while the socket is used to support a vertical 4 x 4 post.

To give you some idea of how much time and trouble we saved using the , consider this: It took us less than a day to set all 36 piers and 4 x 4 posts for the perimeter pool deck. If we had used the traditional posthole method, it would’ve taken at least two days just to dig the three dozen holes and pour the concrete footings.

The plans for building this deck are available free of charge from , the company that sells  piers. We ordered the Splash Deluxe plan, which came with a detailed materials list, cost estimator and instructions.

We spent about $2400 for materials to build our deck, which included the pressure-treated lumber, pier blocks, wood sealant, joist hangers and screws.

Posted in: ppicontentRead more...0 comments

 

Portable Pools Add On's And Upgrades

2015-12-10 21:29:52helpagpools-net

All Pools Come Standard with a pump and filter fitted to the size of the pool, an A Frame ladder, skimmer, 20 mil solid blue overlap liner and all the plumbing. But if you want the option to upgrade or add on, here it is:

Standard Pool Package

img136-150x114
Cartridge Or Sand FilterA frame LadderPlumbing and FittingsSkimmer

 

Available Add Ons

    
Upgrade LadderEntry StepsSalt Water SystemIon System
  img6C 
Start Up ChemicalsComfy PadCommercial Rubber PadsHeaters
     
Winter CoversSolar CoversAuto Pool Cleaner 
Posted in: ppaoRead more...0 comments

 

Comments are closed

  • E Check Discount

  • The Answer Is Blowing In The WindWe often get asked: "What pool should I buy"? The answer my  friend is  "blowing in the wind".  I can see and hear it now its a Legacy from Legacy Pools USA.         Embrace the winds of change, start your family legacy now!

    above ground pools for kidsOur pools have been set up rigged, ready and set to receive all the parties,kids, grand kids.